It’s time to consider what to do with your Intex frame pool when summer ends and the weather cools off. Although it might seem like a good idea to leave it outside in the winter, severe cold can do serious harm. To ensure that it lasts for many more seasons, proper storage is essential.
Although disassembling and storing the pool may seem difficult at first, there are a few easy steps you can take to make sure everything is packed away securely. By doing this, you can maintain the pool’s condition and make it much simpler to set it up when the warm weather returns.
We’ll walk you through the best ways to disassemble, clean, and store your Intex frame pool safely during the winter in this article. You’ll save money, time, and aggravation when it’s time to reopen the pool for the summer by doing this correctly.
An Intex frame pool should be thoroughly cleaned and dried before being stored for the winter to avoid mold growth and other damage. With caution, disassemble the pool, folding the liner loosely to prevent creases. Keep it out of direct sunlight and sharp objects by keeping it in a cool, dry location such as a garage or basement. By keeping it secure throughout the winter, you can make sure that your pool is ready for use come springtime.
- Where to store a pool in winter
- Preparation for storage – stages
- Storage areas
- How to wash a pool for the winter
- Storing a non-collapsible pool under a canopy
- Do I need to disassemble the pool
- Video on the topic
- Frame pool in winter and summer outdoors, operation without dismantling
- how to fold a pool for winter storage
- Where and how to properly store an INTEX frame pool in winter.#pool #pool #intex
- Pool conservation (WINTERIZATION OF A FRAME POOL)
- Assembly of the frame pool/Remove the pool for the winter/How to correctly fold the pool bowl/Frame Pool
- Is it possible to leave the pool for the winter or NOT? INTEX Frame Pool. 3rd year of experience
- FRAME POOL To leave for the winter or NOT
- Durability of the Intex frame pool. What will happen to the pool after its wintering with frozen water?
Where to store a pool in winter
High resistance to temperature fluctuations and mechanical damage is a hallmark of modern materials. Plasticizers are incorporated into the polymers used to make Intex bathing bowls, preserving the structural integrity of the product. However, the winter’s low temperatures cause the plastic to become brittle. As a result, the frame pond needs to be dried out and kept dry until spring.
In the winter, snow and water that seep into the tank will freeze. The pressure exerted by ice on walls varies with temperature, potentially leading to material cracking. It’s critical to keep precipitation out of the polymer container. Intex frame structures can be stored in the following:
- awnings;
- outbuildings;
- in the house;
- balcony or loggia;
- dry attic room;
- storage room or pantry;
- shelter made of dense material.
Crucial! Before the structure is put away for the winter, it must be prepared.
Preparation for storage – stages
- select a room of suitable size;
- clean the area from dust and things;
- drain the water from the tank;
- wash the tank;
- dry the structure;
- disassemble;
- put away for conservation until the next season.
The materials used in the products of the Intex company are very dependable and strong, but frost protection is necessary for polymer structures.
Storage areas
The primary necessity for frame tank storage spaces is the absence of excessive humidity. The ideal situation for the room’s temperature is one of constant positive warmth. Positive effects on the plastic’s condition will result from this. Select a space that satisfies the following needs:
- low humidity;
- stable temperature;
- no rodents;
- inaccessibility for animals;
- free space.
The Intex frame pool should not be kept in a cluttered room or somewhere that animals or children could access it. When loaded, plastic can crack.
How to wash a pool for the winter
It is best to pump out the water from the swimming bowl before cleaning it. A pump or specific drain holes are used for this.
A big sponge, a brush with a handle, or a rag are used to wash the container. After liberally moistening the surface with warm water and liquid soap, it is wiped. Solid particles can cause scratches on plastic, so avoid using abrasive cleaning products.
To remove the detergent, the tank needs to be rinsed under running water after washing. It is not advised to skip this step. Surfactants have a prolonged surface half-life. Next year, the water will be unsafe for human mucous membranes to drink because it will be soapy.
If the tank is collapsible, it should be disassembled and each component cleaned independently after the water is pumped out. Water the segments liberally, then wipe them down with a sponge dipped in soapy water and rinse them.
One must dry the entire pool or its disassembled components. To accomplish this, flip the container over or arrange the disassembled parts on a material that is dry and level.
Storing a non-collapsible pool under a canopy
You will need to build a canopy over your large, originally stationary pool if that’s the case. Winter preservation for containers under a canopy is done as follows:
- drain the tank by 2/3;
- add soap solution to the remaining water;
- wash the surfaces with a soft-bristled brush;
- drain the soapy water;
- rinse the tank thoroughly with running water under pressure;
- cover the structure with a shield or polyethylene.
Crucial! Preserving the tank from precipitation and snowfall is essential. The lid’s area ought to exceed the surface area of the structure. You can use broad, long boards covered with polyethylene.
Do I need to disassemble the pool
For the winter, it is preferable to disassemble a pool that can be folded up. Using a thick polymer to cover it is insufficient. When the temperature drops, snow and rain that enter the tank will solidify into ice and produce pressure.
An animal habitat may develop out of a pool that is closed for the winter. It is possible for rats to chew through plastic and inflict costly damage. It is preferable to take the structure apart and store it in an outbuilding until the following growing season.
| Step | Description |
| 1. Drain the water | Completely drain the pool and let it dry thoroughly to prevent mold and mildew. |
| 2. Clean the pool | Wash the pool with a mild detergent and rinse well. Make sure it’s dry before storing. |
| 3. Disassemble the frame | Carefully take apart the metal frame and store all pieces in one place. |
| 4. Fold and roll | Fold the pool liner smoothly, avoiding sharp creases, and roll it up for storage. |
| 5. Choose the right storage spot | Store the pool indoors in a cool, dry place like a garage or basement. |
| 6. Avoid heavy objects | Don’t stack heavy items on top of the pool to prevent damage. |
Maintaining the integrity of your Intex frame pool for many seasons to come can be achieved by carefully storing it over the winter. The pool must be completely cleaned and dried before any parts are disassembled. This keeps it from growing mold or mildew while it’s being stored.
After everything is tidy and dry, fold the liner carefully and store it in a dry, cool location. Rats can chew through the material, so stay away from any places where they could get access to it. To avoid rust and damage, the frame and accessories should be stored apart in a dry, protected location.
By taking the time to store your pool correctly, you can avoid the headache of having to replace or repair it during the next season. When the warm weather returns, you’ll be able to enjoy your pool once more with a little work now.
