Despite being one of the most used items in the house, the TV remote control is frequently forgotten when doing routine housekeeping. It gathers dust, grime, and even bacteria with repeated handling.
Maintaining a clean remote control is crucial for your health in addition to appearances. Your favorite shows won’t be cut short by unresponsive controls or sticky buttons if the remote is kept clean.
Thankfully, it’s easy to clean the TV remote control at home and doesn’t take much time. Let’s look at some simple ways to maintain the cleanliness and functionality of your remote.
- Need for cleaning
- Quick cleaning from dirt outside
- Cleaning the remote control with disassembly
- Disassembly
- Cleaning the board
- Removing dirt from buttons
- Reverse assembly
- Preventing contamination
- Video on the topic
- Cleaning the remote control, poor button pressing / Remote control repair
- Repairing the remote control contacts – 2 simple working methods
- How to CLEAN the TV or air conditioner remote control yourself
- Disassembling, cleaning, assembling the remote control at home
- How to quickly clean the TV remote control? 💥 Here is the method ! 💥
- How to repair the TV remote control. Repairing the remote control
- DIY TV remote control repair using a PENCIL
Need for cleaning
The frequent handling of numerous people causes the remote control to gradually become dirty. Sweat and grease seep inside the device, combine with dust, and land on the buttons and outside surface. This causes the contacts to oxidize, which interferes with the device’s regular operation. Some buttons therefore require forceful presses. After that, they cease reacting to outside stimuli altogether.
Maintaining the remote control will help keep it from breaking. Additionally, there are two methods you can use to properly clean your TV remote control at home: disassembling the device entirely and cleaning it from the inside.
You will need the following supplies and equipment to clean the remote control:
- medical alcohol;
- wet disks;
- cotton swabs;
- toothpicks;
- microfiber cloths.
Important!
The contamination on the remote control cannot be cleaned with water or a soap solution. The device will malfunction as a result of oxidation on the contacts.
Quick cleaning from dirt outside
It is common practice to clean the remote control of a Samsung TV, or any other brand, from the outside. This keeps the device operating in a functional manner. To prevent the batteries from degrading or getting in the way of the cleaning, take out the batteries from the remote control before you begin.
See also
In the following order, remove dirt:
- Clean the panel with buttons from dirt. To do this, moisten a cotton pad in alcohol or another cleaning liquid and wipe the device with it from the outside. For convenience, when the buttons are located close to each other, use cotton swabs instead of disks.
- Dirt clogged between the buttons of the remote control and the case is pushed out with a toothpick. It is important to prevent debris from getting inside. Otherwise, a complete cleaning with disassembling the case will be required.
- Then remove dirt from the entire surface. To do this, moisten a clean cotton pad in alcohol and wipe the case from all sides.
- Also wipe the battery compartment and its cover on all sides with a clean cotton pad soaked in alcohol.
- Leave the device for 10 minutes to dry and air out the remaining alcohol. Do not close the battery compartment cover. When the device is dry, insert the batteries and check the functionality of the remote control.
Important!
Only after the battery compartment has dried completely should the batteries be inserted. If not, failure is certain.
A liquid solution for cleaning electronics or specialized wet wipes for cleaning phones and household appliances can be used as a cleaning fluid in place of medical alcohol. These products are available in specialty computer equipment stores.
Frequent handling of your TV remote control causes it to gather dust, dirt, and bacteria, so cleaning it at home is crucial to keeping your living area hygienic. To stop bacteria from spreading and maintain the functionality of your remote control, wipe it down with a disinfectant on a regular basis and clean the area around the buttons carefully.
Cleaning the remote control with disassembly
If the standard cleaning of debris from the outside of the remote control was insufficient to bring back the device’s overall functionality and the smooth operation of the buttons, then a deep cleaning will be necessary. In this instance, the apparatus is dismantled and all debris is cleared from both the exterior and the interior. In the event that liquid spills on the remote control, the same cleaning procedure is employed to get it working again.
Disassembly
Take the batteries out of the designated compartment before disassembling the remote control. Next, remove any screws that may be attached to the case. Because they are so tiny, it is best to place them in a little plate to prevent them from getting lost. Using a thin screwdriver, open the case by inserting it into the space between the front and back panels and running it the full circumference.
The result will be the halves separating and the board and buttons becoming accessible. The rubber buttons are typically not fastened. They are thus just eliminated. Separately, place the board on a dry, clean surface. This is a good use for paper towels.
Cleaning the board
This component needs to be cleaned with alcohol or a specialized liquid meant for cleaning electronic equipment. A product like this is applied to the board with a spray. If alcohol is used, they wet a cotton pad or piece of cloth and gently, gently wipe the device without applying pressure. The board should be cleaned on both sides before being placed on a paper towel to dry.
Important!
Liquids with an alcohol base typically evaporate quite quickly. Allow the part to air dry completely for one hour just to be safe.
Removing dirt from buttons
Cleaning the buttons with a soap solution is more practical. Avoid using alcohol if you don’t want the rubber parts to get hard. Warm water and dish soap are combined, thoroughly mixed, and whipped into froth. After dipping rubber components into the ready-made solution, they are left for ten minutes to completely absorb the dirt.
Next, the buttons are removed, and a toothpick or an old toothbrush is used to carefully remove any loose dirt particles. Rinse the components under running water to get rid of any leftover soap solution. After that, they are placed to dry on a fresh towel. Use paper towels to blot to expedite the process.
Reverse assembly
Once the components are completely dry and all the dirt has been cleaned up, the remote control is reassembled. First, align the buttons in the proper locations on the printed circuit board. Next, carefully slide this structure into the device’s front panel. Combining the two case halves is the next step. Once the mount clicks into position, tighten the screws and put the batteries inside the designated compartment.
Preventing contamination
Store the TV remote control in a special case to keep dirt off of it. This kind of device guards against liquid, grease, and dirt getting inside. Furthermore, this offers superior abrasion resistance for the buttons. The device will continue to function normally in such a scenario. It is made from a regular plastic bag.
The following advice will assist in keeping the remote control operating properly:
- do not touch the remote control with dirty or wet hands;
- the device must be stored in a specially designated place when the TV is not working;
- The original remote control requires careful handling;
- cleaning should be done according to the instructions.
See also
| Step | Description |
| 1 | Remove the batteries |
| 2 | Shake out loose debris |
| 3 | Wipe with a soft cloth |
| 4 | Clean between buttons with a cotton swab |
| 5 | Disinfect with alcohol |
| 6 | Dry and reassemble |
To keep your TV remote control functional and hygienic, you must keep it clean. Dust, filth, and bacteria that build up over time can be eliminated in a few easy steps.
Your remote can be easily cleaned without causing any damage by using common household items like cotton swabs, alcohol wipes, and a soft cloth. Frequent cleaning lowers the chance of germs spreading throughout your house and ensures that your remote control stays functional.
Recall that a clean remote not only looks better but also helps you and your family live in a healthier environment. Periodically cleaning it for a few minutes is a small effort that adds up to a lot.
